This replacement kit allows you to replace your own LNB set up with one easy package. It has a single LNB, a 20m run of low loss co axial cable and the connectors required for standard satellite decoders.

A low-noise block downconverter (LNB) is the receiving device mounted on satellite dishes used for satellite TV reception, which collects the radio waves from the dish and converts them to a signal which is sent through a cable to the receiver inside your home or office.

Signs of a faulty LNB include missing satellite television channels, video pixelation, signal drop-out during heavy rain or the complete loss of signal.

If you plan on changing the LNB - please note the exact angle of the faulty unit before you remove it and replace and turn to the same angle for the best signal reception. And insulate the join well to avoid future moisture damage.

There are many factors that have an effect on satellite signal but this unit is a good and fairly cheap starting point if you would like to DIY.

This LNB is officially approved to DSTV standards of quality.

It comes with a 20m mini coil of high quality, low loss satellite and aerial cable. Simple, sturdy and efficient.

Technical Information :
Standard Shield
CONDUCTOR MATERIAL: CCS, NOm.Dia. 1.00±0.01mm
DIELECTRIC MATERIAL: Foam PE NOm.Dia. 4.80±0.1mm
SHIELD: SHIELD 1 Al foil bonded 110%
SHIELD 2 64 x 0.12 Al-Mg 45%
JACKET MATERIAL: PVC NOm.Thick 0.80mm, NOm.Dia. 6.80±0.1mm

And 2 F-connectors

What's in the box
1x Single LNB
1x 20m co ax cable
2x F Connectors